Use Of Batteries; To Prevent Damage - Panasonic DVD-RV80 Operating Instructions Manual

@
=_.-']l'P_i I lt_Jml[_t"_RI
Selecting fine audio equipment such as the unit you've just pur-
chased is only the start of your musical enjoyment. Now it's time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries Asscoi-
atian's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe revel. One that lets the sound
come through loud and clear without annoying biadng or distor-
tion-and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive
noise.
Bound can be deceiving. Over time your hearing =comfort level"
adapts to higher volumes of sound. So what sounds "normal" can
actually be loud and harmful to your headng,
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
cleady, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
Use of batteries I
• Align the poles (+ and -) pmpedy when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry ceil batteries.
• Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necldacas.
• Do not use mchargeable type batteries.
• Do not use bettedes if the covedng has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a tire,
It electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
ii
U)
I Operation notes I
Remote control signal sensor
About 23 feet
/ 30 ° (7 meters) in front of
\ the signal sensor
window
• Do not place obstacles between the remote control signal sensor
and remote control unit.
• Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and end of the
remote ccotml unit free from the dust.
• If this system is installed in a rack with glass doom, the glass doom'
thickness or color might make it necessary to use the remote
control a shorter distance from the system.
I To damage
prevent
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit,
VQT8621