Download Print this page

Panasonic DVD-RV80 Operating Instructions Manual page 37

Dvd video cd/cd player

Advertisement

/
When "3 DTS Digital Surround"
is selected
1
PCM (Factory preset)
Digital audio converted to 48 kHz/16 bit PCM (2ch) is
output during playback of DVDs recorded in DTS Digital
Surround.
2
Bitstream _2
DTS Digital Surround
bitstream (lch-5.1ch)
is output
during playback
of
DVDs
recorded
in DTS
Digital
Surround.
1
Off (Factory preset)
No digital audio is output during playback of DVDs
recorded in DTS Digital Surround.
2
Bitatleam _2
DTS Digital Surround bitstream
(lch-5.1ch)
is output
during
playback
of
DVDs
recorded
in DTS
Digital
Surround.
The screen illustrated in step 2 is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings
screen
Press [ACTION] or [RETURN].
For your reference
eDolby Digital is a digital sound compression technique developed
by Dolby Laboratories.
Supporting 5.1-channel surround sound, as well as stereo (2-chan-
nel) sound, this technique enables a large quanfity of sound data to
be efficlenfiy recorded on a disc.
eDTS
Digital Surround is a 5.l-channel
surround sound system,
which is widely used in movie theaters around the wodd. The sepa-
ration between channels is good and provides a very real surround
effect.
eLinear PCM is an uncornpressed digital audio signal. While a CD is
recorded in 44.1 kHz/16 bit, a DVD is recorded in 48 kHz/16 bit up
to 96 kHz/24 bit. Therefore,
the sound reproduced with these sig-
nals is potentially better than that found on CDs. This player repro-
duces linear PCM in two channels.
eBitstream
is a compressed digital audio signal. This signal can be
decoded into different channels to produce, for instance, 5.1-chan-
nel surround sound.
eThe digital audio output terminal (optical) converts electrical signals
into optical signals and transfers them to an amplifier, These opfical
signals are immune to electrical interference, and they also have
minimal effect on other equipment.
Manufactured under license from Dolby Laboratories.
"oolby", "Pro Logic" and the deuble-D symbol are trademarks
of Dolby
Laboratories.
Confidential
unpublished
works.
_) 1992-1997
Dolby Laboratories. All dghts reserved.
Manufactured under license from Digital Theater Systems,
Inc. US Pat. No. 5,451,942
and other world-wide patents
issues and pending. "OTS" and "OTS Digital Surround" are
trademarks of Digital Theater
Systems, Inc. (_ 1996 Digital
Theater Systems, Inc. All dghts reserved.
Recommended
setting
of
1
"Digital
Audio
Output"
I
Adjust settings as shown in the table below depending on the kind of
equipment that is connected to the optical or coaxial digital audio
output terminal
Recommended
setting
l_fpe of equipment
connected
1 PCM
Down
Conversion
No equipment is
connected
Digital audio
equipment
Yes_ 1
(no decoder)
(-, page 35)
Oolby Digital decoder
Yes_ 1
(w page 34)
DTS Digi_l Surround
yas_l
decoder (,_ page 34)
Dolby DigitaVDTS
Digital Surround
Yes _
decoder (=,,page 34)
DVD-RV60
]
2 Dolby
3 DTS Digital
Digital
Surround
Pea
PCM_2
p_2
PCM
PCM
Bitstream
J_
Bitstream
Type of equipment
connected
NO equipment is
connected
Digital audio
equipment
(no decoder)
(-, page 35)
DolbyDigitaldecoder
(-_ page 34)
Recommended
setting
1 PCM
Down
Conversion
No
Yes _1
Yes _1
Yes.1
DTS Digital Surround
decoder (-_ page 34)
Dolby Digital/DTS
Digital Surround
Yes _1
decoder (-P page 34)
2 Dolby
3 DTS Digital
Digital
Surround
PCM_2
Q]ff_2
_t
PCM
Bitstream
Bitstream
• Underlined items are factory preset.
1 If it is set to =Yes", the player converts linear PCM to 48 kHz even
during analogue output.
Do the following
if you wish to take advantage of high quality
96 kHz sound.
Select "No" and connect this player's audio output terminal to an
amplifier's audio input terminal with the audio/video cable (in-
cluded) or an audio cable (not included).
_2When
connecting
an amplifier (with an optical or coaxial digital
input terminal)
which does not contain a Dolby Digital or DTS
Digital Surround
decoder, be sure to select "PCM" at "2 Dolby
Digital" and =PCM" (DVD-RV80)
or "Off" (DVD-RV60)
at "3 DTS
Digital Surround".
If "Bitstream"
is selected, any attempt to play
DVDs (or CDs encoded with DTS) may cause a high level of
noise that can injure your ears and damage your speakers.
VO'P8821

Advertisement

loading

This manual is also suitable for:

Dvd-rv60