Panasonic DVD-RV80 Operating Instructions Manual page 33

r.__ [t]_h'1_%"._ __lia _ii,] _ G'Jlrd;1=J"_'_l _LI_.] hi] .'tT]iiL'_d'r_ITL_
This unit has a built-in Dolby Digitel/DTS Digital Surround decoder so you can enjoy surround sound encoded with these systems without having to
connect this unit to an amplifier with a decoder. The amplifier must have 5.1 -channel discrete input terminals.
• Digital signals that can be decoded
Dolby Digital
DVD-RV80 I/
DVD-RV60 V"
I DTS DigitalSurround
*/
X_
_Use the connection described in [] on page 34 to enjoy DVDs encoded with DTS.
Back of the player
1
©
CENTER
Audio cable
m
• Connect cables to terminals corresponding to the speakers you m
have connected.
BI
SUB- RO RO
WOOFER (R)
V t" Amplifier with 5.t-channel audio input terminals
i= eReadconnectionthe instructionSdetails, for the amplifier and speakers for
I
I
I
i ("
D D
Speakers
(You can connectfrom 3 to 5 speakersincluding.the fronttwo.)
eFront speakers(L/R)
eCenter speaker
• Surroundspeakers(L/R)
eSubwoofer
When you have finished connection
eln "8 Speaker SeffJng", select "1 Multi-channel" and make changes to suit your speakers (.D page 38).
Speaker presence: Select "Yes" if the corresponding speaker is connected.
Select =No" if the corresponding speaker is not connected.
Center and surround speaker delay time (Dolby Digital DVD only): Adjust if you cannot plane your speakers in the opfimum position.
Channel balance: Adjust the output level of the speakers to make up for differences in volume caused by different types of speaker or distance.
eGo to =7 Digital Audio Output" and set "1 PCM Down Conversion" to "No" (-* page 36).
m
eTum off V.S.S. (-_ page 22) if you have connected a subwoofer, center speaker, or surround speakers as well as the front speakers. Sound will not
come from the other speakers if V.S.S. is on.