Panasonic DVD-RV80 Operating Instructions Manual page 40

qb
Before requesting service for this player, check the chart below for a possible cause ol the problem you are experiencing, Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of
Authorized Service Centers (enclosed with this unit) to locate a convenient sePAse center, or consult your dealer for isetrucUons.
For detailed ins_'tions, contact an authorized servicenter in the U.S.A. and Panasonlc Canada Inc. Customer Care Centre in Canada.
In the U.S.A., call 1.800-211-7262, e-mail consumerproducts@panesonlc.com, or visit www.panasonic.eom
In Canada, call 905-624-5505 or visit www.panasonic.ca
Reference pages are shown as black circled numbers 0.
Common Problems
The player is automatically
switched to the standby mode.
No picture.
Picture is distorted during rapid
advance or rapid reverse.
The picture shown on the
television Is not normal.
(The sides of the picture are cut
off or black bands appear at the
top and bot_m of the screen.)
On-Screen Menu Icons not
displayed or only partially
displayed on the "iv screen.
men_ and _ messages is
No operations can be performed
with the remote control.
Aqpower Sapp car s . ,ntot AC O
.
To conserve power, the player automatically switches to the standby mode after approx. 30 minutes
elapse in the stop mode (Auto power-off function). Turn the power back to ON.
C_n_fo_Waitapout ito2hou_storittoe_i _ '
"
This _ P!W discs other than DVD_,Vi_ CD and CO:;e; i
DVr,3s_regionnumber otherthee "1 Or AII _not _played,_Dswithrnul_ple region ,
n_ng !" can be played, _
The and e ,
i
Ensure that the equipment is connected properly. _ 0
Ensure the television's video input setting (e.g. VCR2) is correct.
_ o_tions rr_y be prohibited by the disc. : i
Press [POWER,_,h/Ii,tO switch the player to the standby mode acd _ON_ _e[y;
prees [POWER C.,hiI] to switch the player to the standby mode, disconnect;the AC power _apply _rd
and then reconnect _ _e player may not be operating prope_ duet0 lighm_. Ste_c _or
some other e_ factor.) i
Go to the in_al settings menu "6 TV Aspect" and change the setting to suit your television. You may
also need to change the screen mode on the television itself. _
Change the position of the On-Screen Menu Icons using =2 Color and Position" in "4 On-Screen
Messages" of the initial settings.
To conserve power, the player is automatically switches to the standby mode after approx. 30
minutes elapse in the stop mode (Auto power-off function). "rum the power back to ON.
Check the batteries are installed with the correct poladtiee (+ and -).
The batteries are depleted: Replace them with new ones.
Point the remote control at the remote control sensor and operate.
Operate the remote control at a distance of not more than 23 feet (7 m) from the remote control
sensor.
Remove the obstacles between the remote control and remote contrOl sensor.
VQT8621