Panasonic DVD-RV80 Operating Instructions Manual page 36

[,,,"Y'_J_i _i ,'11I!1
e=
Q
1
: O 2Ratings Level8a_
mill 3 MenuLanguage English
m 4 On-ScreenMessages
i In 5 FLDisplay Bnght
_1, 6 _/Aspect 4:3
_. 7 Digital A udio Dugout
_. 8 SpeakerSetting 2_hannel
9 Other_ettir_s
• Press RETURN to exit
o
Select the digital output to be output from the optical or coaxial digital
audio output terminal of the player.
(Display examples are from DVD-RV80.)
1
Press [ACTION] in the stop mode.
The initial settings screen is displayed.
2
Press the cursor buttons [&, _'] to
select "7 Digital Audio Output" and
press [ENTER].
3
Press the cursor buttons [4,, _'] to
select the item and press [ENTER].
1 PCM Down Conversion
Select whether to output audio on DVD recorded in 96 kHz
linear PCM as is (No) or to convert it to 48 kHz for output
(Yes).
2 Dolby Digital
To select the signal format (B=tstream or PCM) to be output
from the optical or coaxia{ digital audio output terminal
during playback of DVDs recorded in Dolby Digital.
3 DTS Digital Surround
To select the signadformat (PCM or Bitstream) to be output
from the optir.,ai or coaxial digital audio output terminal
during playback of DVDs recorded in DTS Dig=tad
Surround.
To setect whether DTS Digital Surround bitstream is output
from the optical or coaxial digital audio output terminal or
no digital audio is output dudng playback of DVDs
recorded in DTS Digital Surround.
4
Press the cursor buttons [A, T] to
select the setting and press [ENTER].
When "1 PCM Down Conversion" is selected
1 NO (Factory preset)
No digital audio is output during playback of DVDs
recorded in 96 kHz linear PCM.
elf the DVD is recorded in 48 kHz linear PCM, digital audio
converted to 48 kHz/16 bit is output irrespective of the
setting.
eAudio wilt be output using the original audio recording
system if the DVO has not been copyright-protected.
2 Yes _1
During playback of DVDs recorded in 48 kHz or 96 kHz
linear PCM, digital audio converted to 48 kHz/16 bit is
output.
(DigJtal output of PCM audio is restricted to 48 kHz/16 bit or
below for copyright protection.)
When "2 Dolby Digital" is selected
1 Bitstream _= (Factory preset)
Dolby Digital bitstream (lch--5.1ch) is output dudng
playback of DVDs recorded in Dolby Dig=tad.
2 PCM
Digitad audio converted to 4B kHz/16 bit PCM (2ch) is
output during playback of DVDs recorded in Dolby Digital.
m
VQT8621