Turning On The Terminal; Adjusting The Terminal - Wyse WY-60 User Manual

Turning on the Terminal
Press the power switch to turn on the terminal. You'll hear an immediate beep if
the terminal has received power, and the screen may flash display patterns as the
terminal tests itself. When the cursor appears on the screen, the terminal is
ready for operation.
• Note If the bell sounds and an A, C, E, K, W, X, Y, or Z appears at the bottom
of the screen, press | SETUP I ( | R E S E T |, | SYS R E Q |, | S E L E C T |) to exit the self-test.
If the error codes 0, 1,9, p, or P appear, call your service representative—the
terminal needs to be serviced by a qualified technician.
Adjusting the Terminal
Adjust the screen's brightness with the slideswitch at the right front corner. If
you want the keyboard slanted up slightly, turn it over and pull out the hinged
foot. A height-adjustable arm is available as an option.
Height-Adjustable
Arm