Changing The Operating Parameters - Wyse WY-60 User Manual

Table 2-1 Top Level Exit Functions
Field Function
EXIT
Returns terminal to normal operating mode without saving
parameter changes or definitions.
SAVE MODES Saves operating parameter changes only and returns
terminal to normal operating mode.
SAVE ALL Saves all changes (operating parameters, tabs, key
definitions, answerback message, and function key labels);
returns terminal to normal operating mode.
Restores all settings (operating parameters, tabs, key
definitions, answerback message, function key labels) to
default values and highlights EXIT field. Default values are
not saved unless you select the SAVE ALL option to exit
setup mode.
DEFAULT ALL
RESTORE ALL Restores all settings and definitions to values last saved in
nonvolatile memory and highlights the EXIT field. Values
are saved when the terminal returns to normal operating
mode.
Changing the
Operating Parameters
Table 2-2 Display Setup Parameters
To select one of the setup levels named on the bottom line, press the indicated
function key.
• The screen for that level appears with the name highlighted.
• The fields in the middle of the screen indicate the current settings for
parameters you can change in that level.
• The top line identifies the keys you press to highlight the parameter fields
and change the settings. Pressing | F 1 0 | always returns you to the top level.
The following tables list the parameters for each level and explain their settings.
Default settings are always listed first.
• Note Explanations of setup parameters apply to the terminal's native mode. If
you select a parameter setting that's invalid for the current personality, the
terminal defaults to a valid setting upon leaving setup mode.
Parameter Explanation
ANSWERBACK CONCEAL
OFF
ON'
The answerback message is
Displayed in setup mode
Concealed
1 / / y o u conceal the message, you can't redisplay it—the message stays concealed until you
redefine it. The parameter defaults to off when you redefine the message.