Wyse WY-60 User Manual page 10

Table 2-2
Continued
Display Setup Parameters
Parameter
4 * LINES 3
SCRL SPEED
JUMP
S M O O T H S
SMOOTH-4
SMOOTH-2
SMOOTH-1
SCRN SAVER
ON
OFF
STATUS LINE
STANDARD
EXTENDED
OFF
Explanation
Four times the value of the LINES
parameter
Equal to the value of the LINES parameter,
with a second page containing the rest of
the lines remaining in memory
The display scrolls
At the rate data is received
Eight lines per second
Four lines per second
Two lines per second
One line per second
If the terminal receives no data for
approximately 15 minutes,
The screen blanks until you press a key (no
data is lost)
Screen data displays continuously
The screen displays
A status line with time and cursor line and
column indicators
A status line with editing status messages
No status line
3 Available only in 50 + personality.
Table 2-3 General Setup Parameters
Parameters
AUTOSCRL
ON
OFF
COMM MODE
FULL DUPLEX
BLOCK
HALF DUPLEX
HALF BLOCK
DATA/PRINTER
MODEM/AUX
AUX/MODEM
Explanation
When the cursor moves past the last line of the page,
The data scrolls up one line
It returns to the top of the same page
The terminal's communication mode is
Full duplex
Block
Half duplex
Half-duplex block
The terminal communicates with the computer
through the
MODEM port (AUX port is printer port)
AUX port (MODEM port is printer port)