Wyse WY-60 User Manual page 64

Command
Native WY-50 + ADDS ADDS DG200 HZ
Function Mode ADM 31 VPA2 VP 60 DG210 1500
Assign write-protected character
display attribute/write-protect on
Clear unprotected page to display E S C ! ENH ENH ENH
attribute attr
Assign line attribute [25] ESC G lattr Same
Set tag protect attribute CTRL N
Reset tag protect attribute CTRL 0
Set field attribute
Set character attribute
Start reverse video RS D
End reverse video RS E
Start underline' CTRLT
End underline CTRL U
Start blink CTRL N
End blink CTRLO
Blink enable CTRL C
Blink disable CTRLD
Start blank
End blank
Start dim CTRL\
End dim CTRL]
Nonhidden attributes (space)
Hidden attributes (no space)
Set/reset normal intensity mode
Protecting Data
Write-protect mode off E S C ( Same CTRLO - U S
Write-protect mode on E S C ) Same CTRL N ~ E M
Clear cursor column to ESCV Same ENH
write-protected spaces
Protect mode off E S C 1 Same ENH ENH
Protect mode on ESC & Same ENH ENH
Graphics Characters
Graphics mode on ESC H CTRL B Same ESC 1 ENH ENH
Graphics mode off ESC H CTRL C Same ESC 2 ENH ENH
Display graphics character [26] ESC H key Same ENH ENH
7 IBM 3101-2X mode only.