Verizon FSNO21VA User Manual page 94

3. Click Apply Changes Apply Changes to have changes take effect.
Note: The Internet IPv6 service is required for this feature to
work over the internet.
4. To disable the IPv6 service, move the selector to off
Enable IPv6 Support Enable IPv6 Support field.
5. Click Apply Changes Apply Changes to have changes take effect.
Once configured using valid IPv6 WAN and LAN configurations, you
should not see any errors when you click on the Apply Changes
button and the Basic/System/System Status
Gateway's new IPv6 address.
You should also see the IPv6 address for all IPv6 supported devices
on your local network displayed on the Basic
by selecting the Settings icon to access the Device Settings
for that device.
http://setup.verizon.com/businessinternetgateway |
Basic/System/System Status page will reflect the
05 / CONFIGURING
ADVANCED SETTINGS
Apply Changes
Basic/Devices Devices/Devices
Device Settings page
©2023 Verizon. All Rights Reserved
94
off in the
Devices page