Verizon FSNO21VA User Manual page 23

COmpUTER NETWORk CONFIGURATION
CONNECTING A WI-FI DEVICE USING WPS
Wi-Fi Protected Setup (WPS) is an easier way for many devices
to set up a secure Wi-Fi network connection. Instead of manually
entering passwords or multiple keys on each Wi-Fi client, such as
a laptop, printer, or external hard drive, your Gateway creates a
secure Wi-Fi network connection.
In most cases, this only requires the pressing of two buttons – one
on your Gateway and one on the Wi-Fi client. This could be either
a built-in button or one on a compatible Wi-Fi adapter/card, or a
virtual button in software. Once completed, this allows Wi-Fi clients
to join your Wi-Fi network.
To initialize the WPS process, you can either press and hold the
WPS button located on the rear of your Gateway for more than two
seconds or use the UI and press the on-screen button.
You can easily add Wi-Fi devices to your Wi-Fi network using the
WPS option if your Wi-Fi device supports the WPS feature.
To access WPS using the user interface:
1. From the Basic
Wi-Fi Protected Setup. Wi-Fi Protected Setup
Basic menu, select Wi-Fi Wi-Fi settings, then click