Verizon FSNO21VA User Manual page 137

NETWORk SETTINGS
• Destination Destination – enter the destination IP of the destination
host, subnet address, network address, or default route.
The destination for a default route is 0.0.0.0.
• Netmask Netmask – enter the network mask. This is used in
conjunction with the destination to determine when a
route is used.
• Gateway Gateway – enter the IP address of your Gateway.
• Metric Metric – enter a measurement preference of the route.
Typically, the lowest metric is the most preferred route. If
multiple routes exist to a specific destination network, the
route with the lowest metric is used.
4. Click Apply Apply and Apply Changes
Internet Group Management Protocol (IGMP)
IGMP allows for managing a single upstream interface and multiple
downstream interfaces of the IGMP/MLD (Multicast Listener
Discovery)-based forwarding. This function enables the system
to send IGMP host messages on behalf of hosts that the system
discovers through standard IGMP interfaces. Also, IGMP snooping
allows an Ethernet switch to "listen in" on the IGMP conversation
between hosts and routers, while IGMP querier will send out
periodic IGMP queries.
To enable this function:
1. Choose the IGMP interfaces by clicking on the check boxes
on the screen.
2. Click Apply Changes Apply Changes to save changes.
Apply Changes to save changes.