In rare cases you may also need to:
•
Unplug the Ethernet cable to your Gateway and restart the
Gateway, wait 1-2 mins. and insert the Ethernet cable again.
•
Under limited circumstances you may use a port forwarding
configuration on the Gateway, based on the application you are
using (refer to the 5.0e/ Port Forwarding section or Verizon's
support online help for more details).
6.0g/
FRONT LED AND WPS bUTTON
Front LED Mode
Bootup
Cellular signal (or
after single click pair
button)
http://setup.verizon.com/businessinternetgateway |
Status
System off
System booting
Firmware update
Passing signal
No signal/cold SIM
No SIM card
06 / TROUBLESHOOTING
LED Pattern
Off
Soft blink white
Fast blink white
Solid white
Solid red
Hard blink red
©2023 Verizon. All Rights Reserved
167