Verizon FSNO21VA User Manual page 106

2. You can edit the DHCP server settings for a device. On the
IPv6 Address Distribution page, click the Edit IPv6 Address Distribution
screen column. The DHCP Settings page opens with the
device information displayed.
3. To configure the DHCP server complete the following fields:
• Start IPv6 Address Start IPv6 Address – the starting IPv6 address in the
consecutive list of addresses that makes up this LAN pool
for the DHCPv6 server.
• End IPv6 Address – the ending IPv6 address in the End IPv6 Address
consecutive list of addresses that makes up this LAN pool
for the DHCPv6 server.
• Lease Time in Minutes – assigns the amount of time in Lease Time in Minutes
minutes that each device is assigned an IP address by the
DHCP server when it connects to the network.
When the lease expires, the server determines if the
computer has disconnected from the network. If it has,
the server may reassign this IP address to a newly
connected computer.
4. Click Apply Apply to save changes.
http://setup.verizon.com/businessinternetgateway |
05 / CONFIGURING
ADVANCED SETTINGS
Edit icon on the
©2023 Verizon. All Rights Reserved
106