Verizon FSNO21VA User Manual page 103

NETWORk SETTINGS
Static WAN with LAN IPv6 Stateful Settings
1. To configure IPv6 LAN Stateful mode with Static
the Stateful (DHCPv6) Stateful (DHCPv6) option on the IPv6 Configuration
Controls Controls page as shown below:
2. Specify the Stateful (DHCPv6)
LAN IPv6 addresses by entering the following details:
• IPv6 LAN Configuration (select Stateful IPv6 LAN Configuration
dropdown list)
• LAN Prefix (automatically populated) LAN Prefix
• IPv6 LAN Address (automatically populated) IPv6 LAN Address
• DHCPv6 Client Address Range (start and end) DHCPv6 Client Address Range
• LAN Link Local Address (automatically populated) LAN Link Local Address
Stateful (DHCPv6) settings to be used to assign
Static WAN, select
IPv6 Configuration
Stateful from the