Verizon FSNO21VA User Manual page 76

5.0d/ IPV6 PINhOLES
The IPv6 Pinhole feature of the Gateway allows an application to
send incoming packets for a certain port number to the destination
computer by setting up the rule of authorization.
To configure the rules:
1. From the Advanced
then click IPv6 Pinhole
2. Select external and internal host, protocol and the
application port type.
3. To schedule the rule, select either Always
the Schedule Schedule list box.
4. Click Add to list Add to list. The screen displays opened pinhole port
and its status. It shows the IP addresses of remote device
and connected device on your network.
5. Click Apply Changes Apply Changes to save changes.
http://setup.verizon.com/businessinternetgateway |
Advanced menu, select Security & Firewall
IPv6 Pinhole.
05 / CONFIGURING
ADVANCED SETTINGS
Security & Firewall and
Always or User Defined User Defined in
©2023 Verizon. All Rights Reserved
76