NETWORk SETTINGS
2.
Configure the following settings, as needed.
General
Verify the following information:
•
Status – displays the connection status of the network.
Status
•
Network
Network – displays the type of network connection.
•
Connection Type – displays the type of connection
Connection Type
interface.
•
MTU – specifies the largest packet size permitted for
MTU
internet transmissions:
–
Automatic: sets the MTU (Maximum Transmission Unit
Automatic
at 1500).
–
Automatic by DHCP
Automatic by DHCP: sets the MTU according to the
DHCP connection.
–
Manual: allows you to manually set the MTU.
Manual
•
Internet APN (Access Point Name) – you may input APN
Internet APN
information for your private network.
WAN IP Address
•
In the Internet Protocol
specify one of the following:
–
No IPv4 Address: the connection has no IP address.
No IPv4 Address
This is useful if the connection operates under a
bridge.
Internet Protocol section of WAN IP Address
WAN IP Address,