Oncue Plus Generator Management System - Kohler 48RCLC Installation Manual

5.4 OnCue Plus Generator Management System

®
The OnCue Plus Generator Management System is included with the RCL generator sets and allows monitoring and control of
your generator set from a personal computer, smart phone, or tablet. OnCue Plus can also be configured to send email or text
message notifications in the event of a generator set fault. See the documents and manuals provided with the OnCue Plus kit
for instructions.
Listed below are the minimum requirements for connecting your generator to the Internet. To use OnCue Plus, you must have:
•
"Always-on" Internet service for generator set connection (for example, cable, DSL, or phone line modem connected 24
hours).
•
An unused Ethernet port on a switch, router, or modem.
•
An uninterruptible power supply (UPS) for the modem and router (recommended).
•
5E customer-supplied network cable for connection of the generator set to the customer's Ethernet router (see installation
instructions in the Connect AC and DC Wiring section) OR optional OnCue Plus Wireless kit.
•
USB cable, male USB A to male mini-B, for updating the controller firmware.
For instructions to connect the network cables to the generator set, see instructions in the Connect AC and DC Wiring section.
Instructions to install the OnCue Plus Wireless Kit are included with the kit.
TP-7203 4/23 47