Oncue Plus Generator Management System - Kohler 8RESV Operation

DC2 Controller Features
Four-button keypad: OFF, AUTO, RUN, and
D
EXERCISE pushbuttons
LED indicators for OFF, AUTO, and RUN modes
D
LCD display:
D
Two lines x 16 characters per line
d
Backlit display with adjustable contrast for
d
excellent visibility
Scrolling system status display
D
Generator set status
d
Voltage and frequency
d
Engine temperature
d
Oil pressure
d
Battery voltage
d
Engine runtime hours
d
Maintenance reminders
d
OnCuer Plus status (connected/disconnected)
d
Date and time displays
D
Smart engine cooldown senses engine temperature
D
Digital isochronous
D
steady-state speed at all loads
Digital voltage regulation: ±0.5% RMS no-load to
D
full-load
Automatic start with programmed cranking cycle
D
Exercise modes
D
Unloaded weekly exercise with complete system
d
diagnostics
Unloaded full-speed exercise
d
TP-6880 10/14
governor to maintain
Loaded full-speed exercise (Model RXT ATS
d
required)
Front-access mini USB connector for SiteTecht
D
connection or the Kohler USB utility
Integral Ethernet connector for Kohlerr OnCuer Plus
D
Built-in 2.5 amp battery charger
D
Remote two-wire start/stop capability for optional
D
connection of Model RDT or RSB transfer switches
Diagnostic messages
D
Displays diagnostic messages for the engine,
d
generator set, model RXT transfer switch, and
optional programmable interface module (PIM)
and load control module (LCM) or load shed kit
Over 70 diagnostic messages can be displayed
d
A laptop computer and Kohlerr SiteTech software
D
can be used to change system settings
A laptop computer and Kohlerr SiteTech software or
D
Kohler USB Utility software can be used to update
controller firmware
See the generator set Installation manual for more
information.
1.7 OnCue Plus Generator
Management System
The OnCuer Plus Generator Management System
comes included with your generator and allows
monitoring and control of your generator set from a
personal computer, smart phone, or tablet. OnCuer
Plus can be configured to send email or text message
notifications in the event of a generator set fault. See
TP-6928, OnCuer Plus Software Operation Manual, for
software instructions.
Section 1 Descriptions and Service Views 15