Kohler 48RCLC Installation Manual page 10

Short circuits. Hazardous voltage/current will cause severe injury or death. Short circuits can cause bodily injury and/or
equipment damage. Do not contact electrical connections with tools or jewelry while making adjustments or repairs. Remove all
jewelry before servicing the equipment.
Engine block heater. Hazardous voltage will cause severe injury or death. The engine block heater can cause electrical
shock. Remove the engine block heater plug from the electrical outlet before working on the block heater electrical connections.
Electrical backfeed to the utility. Hazardous backfeed voltage can cause severe injury or death. Install a transfer switch
in standby power installations to prevent the connection of standby and other sources of power. Electrical backfeed into a utility
electrical system can cause severe injury or death to utility personnel working on power lines.
Heavy Equipment
WARNING
Hot Parts
WARNING
WARNING
WARNING
Servicing the exhaust system. Hot parts can cause severe injury or death. Do not touch hot engine parts. The engine and
exhaust system components become extremely hot during operation.
Notice
Canadian installations only. For standby service connect the output of the generator set to a suitably rated transfer switch in
accordance with Canadian Electrical Code, Part 1.
10
Unbalanced weight.
Improper lifting can cause severe injury or death and equipment damage.
Do not use lifting eyes. Lift the generator set using lifting bars inserted through the lifting
holes on the skid.
Hot coolant and steam.
Can cause severe injury or death.
Before removing the pressure cap, stop the generator set and allow it to cool. Then loosen
the pressure cap to relieve pressure. Fill system before starting unit.
Hot engine and exhaust system.
Can cause severe injury or death.
Do not work on the generator set until it cools.
Hot engine oil.
Can cause severe injury or death.
Avoid skin contact with hot oil. Do not start or operate the generator set with the engine
oil filler cap removed, as hot oil can spray out. Ensure that the lubrication system is not
under pressure when servicing. Do not work on the generator set until it cools.
NOTICE
TP-7203 4/23