Table of Contents
Advertisement
(Continued)
Electrical Characteristics of LMR400 Cable
Insulation Resistance
Cabling Guidelines
Follow these guidelines when you install cables:
• Examine the cable end points and connectors for any bends or damage.
• Check the electrical continuity of the cable for both inner and outer conductors.
• Check for any electrical short in cables.
• Inspect the cable outer sheath for any damage.
Perform Initial Software Configuration for ACX7348
Routers
You can easily customize the factory-default configuration with just a few commands. Initially, you'll
need to make changes through the console port. After you configure the management port, you can
access the ACX7348 using SSH and make additional configuration changes. You can always revert to the
factory-default configuration whenever you want.
Have the following information ready before you begin customizing the router:
• Hostname
• Root authentication password
• Management port IP address
• Default gateway IP address
• IP address and prefix length of remote prefixes
• (Optional) SNMP read community, location, and contact information
1.
Verify that the following default serial port settings are configured on your laptop or desktop PC:
> 5000 MΩ
93
Advertisement
Table of Contents
