Figure 54: Attach the Cable Management Brackets to the Chassis
3. Grasp both sides of the router, lift the router, and position it in the rack, aligning the holes of the
mounting brackets with the holes in the front post of the rack. Align the bottom hole in both the
mounting brackets with a hole in each rack post, making sure that the chassis is level.
Figure 55: Mount the Chassis to the Rack
4. Secure the mounting brackets to the rack by using four screws appropriate for your rack. Tighten the
screws.
5. Slide the outer cage of the air filter unit into the rails on the cable management brackets until it
stops.
104