Table of Contents
Advertisement
• Baud Rate—9600
• Flow Control—None
• Data—8
• Parity—None
• Stop Bits—1
• DCD State—Disregard
2.
Connect the console port on the ACX7348 to a laptop or a desktop PC using the RJ-45 cable and
RJ-45 to DB-9 adapter. The console (CON) port is the RJ-45 port on the Routing Engine.
NOTE: If your laptop or desktop PC doesn't have a serial port, use a serial-to-USB adapter
(not provided).
3.
At the Junos OS Evolved login prompt, type root to log in.
You don't need to enter a password. If the software boots before you connect your laptop or
desktop PC to the console port, you might need to press the Enter key for the prompt to appear.
re0 login: root
4.
Start the CLI.
[vrf:none] root@re0:~# cli
5.
Enter configuration mode.
root@re0> configure
6.
Stop the chassis auto-upgrade process.
[edit]
root@re0# delete chassis auto-image-upgrade
7.
Stop zero-touch provisioning (ZTP).
[edit]
root@re0# delete system commit factory-settings
94
Advertisement
Table of Contents
