Loading Data From The Drive Into The Project - Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual

Commissioning (Startdrive)
8.3 Basics
8.3.4

Loading data from the drive into the project

Overview
If you change the configuration of a converter in the online mode, then the configuration
deviates from the data in the Startdrive project. To update project data, load the drive data from
the converter into the project.
Requirement
• A project with a matching drive is created and is open in Startdrive.
• The converter and SIMATIC S7 controller are in offline mode.
• For activated user management (UMAC):
The function rights for editing drive data are activated for your user account.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Configuration Manual
109810578).
224
(https://support.industry.siemens.com/cs/ww/en/view/
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB