Enhancer Flanger; Enhancer Delay; Chorus Delay - Roland VERSELAB MV-1 Parameter Manual

0
67 Enhancer
L in
Enhancer Enhancer
Mix
R in
Enhancer Enhancer
Mix
Parameter Value
Enhancer Sens 0–127
Enhancer Mix 0–127
Flanger Pre Delay 0.0–100 [msec]
Flanger Rate OFF, ON
(sync sw)
Flanger Rate 0.05–10.00 [Hz]
(Hz)
Note
Flanger Rate
(note)
&
"Note" (p. 51)
Flanger Depth 0–127
Flanger Feedback -98–+98 [%]
Flanger Balance D100:0W–D0:100W
Level 0–127
0
68 Enhancer
L in
Enhancer Enhancer
Mix
R in
Enhancer Enhancer
Mix
Parameter Value
Enhancer Sens 0–127
Enhancer Mix 0–127
Delay Time OFF, ON
(sync sw)
Delay Time 1–2600 [msec]
(msec)
Note
Delay Time
(note)
&
"Note" (p. 51)
Delay Feedback -98–+98 [%]
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
Delay HF Damp 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Delay Balance D100:0W–D0:100W
Level 0–127
Flanger
Balance D
Feedback
Flanger Flanger
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated by the
enhancer
Adjusts the delay time from the direct sound
until the flanger sound is heard.
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the flanger sound
that is fed back into the effect. Negative (-)
settings will invert the phase.
Adjusts the volume balance between the
sound that is sent through the flanger (W)
and the sound that is not sent through the
flanger (D).
Output Level
Delay
Balance D
Delay Delay
Feedback
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated by the
enhancer
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay time from when the original sound is
heard to when the delay sound is heard
Adjusts the proportion of the delay sound
that is fed back into the effect. Negative (-)
settings will invert the phase.
Adjusts the frequency above which the delay
sound fed back to the effect is filtered out
(BYPASS: no cut).
Adjusts the volume balance between the
sound that is sent through the delay (W) and
the sound that is not sent through the delay
(D).
Output Level
69 Chorus
L in
L out
Balance W
Balance W
R in
R out
Parameter
Chorus Pre Delay
Chorus Rate
(sync sw)
Chorus Rate
(Hz)
Chorus Rate
(note)
Chorus Depth
Chorus Balance
Delay Time
(sync sw)
Delay Time
(msec)
Delay Time
(note)
Delay Feedback
Delay HF Damp
Delay Balance
L out
Level
Balance W
Balance W
R out
0
Delay
Balance D
Balance W
Chorus Chorus
Balance W
Balance D
Value Explanation
Adjusts the delay time from the direct sound
0.0–100 [msec]
until the chorus sound is heard.
If this is ON, the rate synchronizes with the
OFF, ON
tempo of the rhythm.
0.05–10.00 [Hz]
Frequency of modulation
Note
&
"Note"
(p. 51)
0–127 Depth of modulation
Volume balance between the direct sound (D)
D100:0W–D0:100W
and the chorus sound (W)
If this is ON, the rate synchronizes with the
OFF, ON
tempo of the rhythm.
1–2600 [msec]
Delay time from when the original sound is
Note
heard to when the delay sound is heard
&
"Note"
(p. 51)
Adjusts the proportion of the delay sound
-98–+98 [%] that is fed back into the effect. Negative (-)
settings will invert the phase.
200, 250, 315, 400, 500,
630, 800, 1000, 1250, Adjusts the frequency above which the delay
1600, 2000, 2500, 3150, sound fed back to the effect is filtered out
4000, 5000, 6300, 8000, (BYPASS: no cut).
BYPASS [Hz]
Adjusts the volume balance between the
sound that is sent through the delay (W) and
D100:0W–D0:100W
the sound that is not sent through the delay
(D).
0–127 Output Level
MFX Parameters
Balance D
L out
Balance W
Delay Delay
Balance W
Feedback
R out
Balance D
43