Parameter
JUNO 1, JUNO 2, JUNO12, JX-1 1,
MODE
JX-1 2
NOISE
0–100
100-0–0-100 (%)
BALANCE
Flanger
This effect creates modulation like a jet airplane taking off and landing.
Parameter
DEPTH
0–100
0–100 (when the SYNC parameter is OFF)
RATE
4.000–0.016 (bars; when the SYNC
parameter is ON)
0–100
MANUAL
0–100
RESONANCE
100-0–0-100 (%)
BALANCE
SYNC
OFF, ON
Phaser
This effect creates modulation by adding a phase-shifted sound.
Parameter
DEPTH
0–100
0–100 (when the SYNC parameter is OFF)
RATE
4.000–0.016 (bars; when the SYNC
parameter is ON)
0–100
MANUAL
0–100
RESONANCE
100-0–0-100 (%)
BALANCE
SYNC
OFF, ON
Wah
This effect gives a wah-wah sound, by cyclically changing the tone.
Parameter
0–100
PEAK
0–100 (when the SYNC parameter is OFF)
RATE
1.000–0.010 (bars; when the SYNC parameter
is ON)
MANUAL
0–100
DEPTH
0–100
Sets the filter type.
FLT TYPE
OFF, ON
SYNC
Value
Sets the type of effect.
Adjusts the volume of noise generated by the effect.
Adjusts the volume balance between dry (the original sound) and effect
sound.
Value
Value
Value
LPF
BPF
Explanation
Explanation
Sets the depth of the effect sound.
Sets the cycle (period) of the effect sound.
Sets the frequency range in which the effect is applied.
Smaller values reduce the flanging effect in the low end.
Adjusts the filter's resonance level.
Increasing the value further emphasizes the effect, for a more
unusual sound.
Adjusts the volume balance between dry (the original sound)
and effect sound.
When this is ON, the effect sound synchronizes with the tempo.
Explanation
Sets the depth of the effect sound.
Sets the cycle (period) of the effect sound.
Sets the frequency range in which the effect is applied.
Larger values reduce the phasing effect in the low end.
Adjusts the filter's resonance level.
Increasing the value further emphasizes the effect, for a more
unusual sound.
Adjusts the volume balance between dry (the original sound)
and effect sound.
When this is ON, the effect sound synchronizes with the tempo.
Explanation
Larger values narrow the frequency range at which the effect
is applied.
Sets the cycle (period) of the effect.
Sets the frequency range in which the effect is applied.
Sets the depth of the effect.
Applies the effect over a wide frequency range.
Applies the effect over a narrow frequency range.
When this is ON, the effect sound synchronizes with the
tempo.
Appendix
135