Table of Contents
Advertisement
Parameter List
Project
Parameter
Value
COMMON
MstrTune
435.0–445.0Hz
These are the settings for audio input from a computer or
PC IN
smartphone connected via USB.
PC Level
0–127
PC Pan
L128–127R
COLOR
Sets the pad illumination colors for each pad operation mode.
ORANGE
YELLOW
Note
GREEN
BLUE
PURPLE
PINK
Play
WHITE
SKYBLUE
P.YELLOW
Stay
P.BLUE
P.PINK
L.RED
L.ORANGE
D.Style
L.YELLOW
L.GREEN
P.GREEN
L.SKYBLUE
M.Style
L.BLUE
L.PURPLE
Song
GEN
Parameter
Value
Master Level
0–127
NONE, C, C#, D, D#, E,
Key
F, F#, G, G#, A, A#, B
Specifies the scale from which the chord is
extracted.
Scale
& For details on scales, refer to "List of scales
(when KEY is C)" (p. 8).
TEMPLATE
Parameter
Value
Intro
Verse1
Verse2
Verse3
Chorus1
Chrous2
Bridge
Outro
NONE, SECT1 - SECT 16
Fill
PreChorus
Breakdown
Vamp
User1
User2
User3
User4
Explanation
Specifies the reference pitch (master tune) for
the project.
* This has no effect on the pitch of the VOCAL
track.
Specifies the input level from the USB PC IN
port.
Specifies the pan of the USB PC IN port.
Sets the color used for pads used for playing
in Note mode.
Sets the color used to indicate that a clip is
playing back in Section Select mode.
Sets the color used to indicate that a clip has
stopped in Section Select mode.
Sets the pad color used when a drum track
(KICK, SNARE, HI-HAT, KIT) is selected in Style
mode.
Sets the pad color when a melodic track
(BASS, INST 1, INST 2) is selected in Style
mode.
Explanation
Adjusts the volume.
Specifies the note
When a key or scale
that will be the key of
is set for a clip and
the scale.
the clip is loaded into
another project, the
clip is automatically
transposed to match
the MASTER KEY and
scale of the project.
Explanation
Sets the section to assign for the
structural elements of a song (like
the intro or the chorus) when using a
song template.
TRANSPOS
Parameter
Value
KICK Trans
SNARE Trans
HIHAT Trans
KIT Trans
ON, OFF
BASS Trans
INST1 Trans
INST2 Trans
Tone Edit
"
"
Parameters with the
showing can be assigned to the knob.
ASSIGN
Parameter
Value
Level
0–127
ASSIGN
Pan
L64–0–63R
ASSIGN
Delay Send
0–127
ASSIGN
(Delay Send Level)
Reverb Send
0–127
ASSIGN
(Reverb Send Level)
Coarse Tune
-48–+48
ASSIGN
Fine Tune
-50–+50
ASSIGN
MONO, POLY,
Mono/Poly
TONE
OFF, ON,
Legato
(Legato Switch)
TONE
Bend Range
0–24, TONE
Portament
OFF, ON,
(Portamento
TONE
ASSIGN
Switch)
Porta Time
0–127, TONE
ASSIGN
(Portamento Time)
Cutoff
(Cutoff
-64–+63
ASSIGN
Offset)
Resonance
-64–+63
ASSIGN
(Resonance Offset)
Attack
-64–+63
ASSIGN
(Attack Time Offset)
Explanation
Sets whether the clip's key/scale are
automatically changed to follow the
key/scale that are set for the song.
Set this to "ON" to make the clip's
key/scale follow the song's settings.
* This is only enabled when the track
type is "tone".
Explanation
Adjusts the volume of each part.
Specifies the panning of each part's sound when
using stereo output.
Specifies the send level to delay.
Specifies the send level to reverb.
Shifts the pitch in units of a semitone.
Finely adjusts the pitch in units of one cent.
Choose MONO if you want the tone assigned to
the part to play monophonically; choose POLY if
you want to play it polyphonically.
Choose TONE if you want to use the setting
specified by the tone.
If you play monophonically, you can apply legato.
"Legato" is a performance technique that smoothly
connects one note to the next. This produces an
effect similar to hammering-on or pulling-off when
playing a guitar.
Choose "ON" to apply legato, or "OFF" if you don't
want to apply it.
Choose "TONE" if you want to use the setting
specified by the tone.
Specifies the amount of pitch change in semitone
units (maximum two octaves) that occurs when
you move a controller when pitch bend is assigned
to that controller.
Choose TONE if you want to use the setting
specified by the tone.
Specifies whether portamento is applied. Select
ON to apply portamento, or OFF if you don't want
to apply portamento.
Choose TONE if you want to use the setting
specified by the tone.
When portamento is used, this specifies the time
over which the pitch will change. Higher settings
will cause the pitch change to the next note to take
more time.
Choose TONE if you want to use the setting
specified by the tone.
Adjusts how far the filter is open.
Increasing this value makes the sound brighter,
and decreasing it makes the sound darker.
Emphasizes the portion of the sound in the region
of the cutoff frequency, adding character to the
sound. Excessively high settings can produce
oscillation, causing the sound to distort.
Increasing this value strengthens the character,
and decreasing it weakens the character.
Adjusts the time over which the sound reaches its
maximum volume after you press the key.
Larger settings of this value make the attack
gentler, and smaller settings make the attack
sharper.
3
Advertisement
Chapters
Table of Contents
