Gtampsim Chorus - Roland VERSELAB MV-1 Parameter Manual

0
57 GtAmpSim
L in
Pre Amp Pre Amp
R in
Parameter Value
Pre Amp Sw OFF, ON
JC-120
CLEAN TWIN
MATCH DRIVE
BG LEAD
MS1959I
MS1959II
Pre Amp Type
MS1959I+II
SLDN LEAD
METAL 5150
METAL LEAD
OD-1
OD-2 TURBO
DISTORTION
FUZZ
Pre Amp Volume 0–127
Pre Amp Master 0–127
Pre Amp Gain LOW, MIDDLE, HIGH
Pre Amp Bass 0–127
Pre Amp Middle 0–127
Pre Amp Treble 0–127
Chorus
Balance D
Balance W
Speaker Speaker Chorus Chorus
Balance W
Balance D
Explanation
Turns the amp switch on/off.
Type of guitar amp
This models the sound of the Roland JC-120.
This models a Fender Twin Reverb.
This models the sound input to left input on
a Matchless D/C-30.
A simulation of the latest tube amp widely
used in styles from blues and rock.
This models the lead sound of the MESA/
Boogie combo amp.
The sound of a tube amp typical of the late
'70s to '80s.
This models the sound input to Input I on a
Marshall 1959.
This is a trebly sound suited to hard rock.
This models the sound input to Input II on a
Marshall 1959.
This models the sound of connecting inputs I
and II on a Marshall 1959 in parallel. lt creates
a sound with a stronger low end than I.
This models a Soldano SLO-100. This is the
typical sound of the eighties.
This models the lead channel of a Peavey EVH
5150.
This is distortion sound that is ideal for
performances of heavy riffs.
This models the sound of the BOSS OD-1.
This produces sweet, mild distortion.
This is the high-gain overdrive sound of the
BOSS OD-2.
This gives a basic, traditional distortion
sound.
A fuzz sound with rich harmonic content.
Volume and amount of distortion of the amp
Volume of the entire pre-amp
Amount of pre-amp distortion
Tone of the bass/mid/treble frequency range
Parameter Value
Speaker Sw OFF, ON
L out
SMALL 1
SMALL 2
R out
MIDDLE
JC-120
BUILT-IN1
BUILT-IN2
BUILT-IN3
Speaker Type
BUILT-IN4
BUILT-IN5
BG STACK1
BG STACK2
MS STACK1
MS STACK2
MTL STACK
2-STACK
3-STACK
Chorus Switch OFF, ON
Chorus Pre Delay 0.0–100 [msec]
Chorus Rate 0.05–10.00 [Hz]
(Hz)
Chorus Depth 0–127
Chorus Balance D100:0W–D0:100W
Level 0–127
MFX Parameters
Explanation
Selects whether the sound will be sent
through the speaker (ON) or not (OFF)
Diameter (in
inches) and
Cabinet Microphone
number of the
speaker
Small open-back
10 Dynamic
enclosure
Small open-back
10 Dynamic
enclosure
Open back
12 x 1 Dynamic
enclosure
Open back
12 x 2 Dynamic
enclosure
Open back
12 x 2 Dynamic
enclosure
Open back
12 x 2 Condenser
enclosure
Open back
12 x 2 Condenser
enclosure
Open back
12 x 2 Condenser
enclosure
Open back
12 x 2 Condenser
enclosure
Sealed enclosure 12 x 2 Condenser
Large sealed
12 x 2 Condenser
enclosure
Large sealed
12 x 4 Condenser
enclosure
Large sealed
12 x 4 Condenser
enclosure
Large double
12 x 4 Condenser
stack
Large double
12 x 4 Condenser
stack
Large triple stack 12 x 4 Condenser
Chorus on/off
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through the
chorus (D).
Output Level
37