2Voice Pitch Shifter; Overdrive Chorus; Overdrive Flanger - Roland VERSELAB MV-1 Parameter Manual

MFX Parameters

48 2Voice Pitch Shifter

Shifts the pitch of the original sound. This 2-voice pitch shifter has two
pitch shifters, and can add two pitch shifted sounds to the original
sound.
L in
Level 1
Pan 1 R
2 Voice Pitch 2 Voice Pitch
Shifter Shifter
Pan 2 L
Level 2
R in
Parameter Value
Pitch1 Coarse -24–+12 [semi]
Pitch1 Fine -100–+100 [cent]
Pitch1 Delay OFF, ON
(sync sw)
Pitch1 Delay 1–1300 [msec]
(msec)
Note
Pitch1 Delay
(note)
&
"Note" (p. 51)
Pitch1 Feedback -98–+98 [%]
Pitch1 Pan L64–63R
Pitch1 Level 0–127
Pitch2 Coarse -24–+12 [semi]
Pitch2 Fine -100–+100 [cent]
Pitch2 Delay OFF, ON
(sync sw)
Pitch2 Delay 1–1300 [msec]
(msec)
Note
Pitch2 Delay
(note)
&
"Note" (p. 51)
Pitch2 Feedback -98–+98 [%]
Pitch2 Pan L64–63R
Pitch2 Level 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Balance D100:0W–D0:100W
Level 0–127
34
Balance D
2-Band EQ 2-Band EQ
Pan 1 L
Balance W
Balance W
Pan 2 R
2-Band EQ 2-Band EQ
Balance D
Explanation
Adjusts the pitch of Pitch Shift 1 in semitone
steps.
Adjusts the pitch of Pitch Shift Pitch 1 in
2-cent steps.
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Adjusts the delay time from the direct sound
until the Pitch Shift 1 sound is heard.
Adjusts the proportion of the pitch shifted
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Stereo location of the Pitch Shift 1 sound
Volume of the Pitch Shift 1 sound
Settings of the Pitch Shift 2 sound.
The parameters are the same as for the Pitch
Shift 1 sound.
Gain of the low range
Gain of the high range
Volume balance between the direct sound (D)
and the pitch shifted sound (W)
Output Level
49 Overdrive
L in
L out
R in
Parameter Value
Overdrive Drive 0–127
Overdrive Pan L64–63R
R out
Chorus Pre Delay 0.0–100 [msec]
Chorus Rate OFF, ON
(sync sw)
Chorus Rate 0.05–10.00 [Hz]
(Hz)
Note
Chorus Rate
(note)
&
Chorus Depth 0–127
Chorus Balance D100:0W–D0:100W
Level 0–127
50 Overdrive
L in
R in
Parameter Value
Overdrive Drive 0–127
Overdrive Pan L64–63R
Flanger Pre Delay 0.0–100 [msec]
Flanger Rate OFF, ON
(sync sw)
Flanger Rate 0.05–10.00 [Hz]
(Hz)
Note
Flanger Rate
(note)
&
Flanger Depth 0–127
Flanger Feedback -98–+98 [%]
Flanger Balance D100:0W–D0:100W
Level 0–127
0
Chorus
Balance D
Overdrive Overdrive Chorus Chorus
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive sound
Adjusts the delay time from the direct sound
until the chorus sound is heard.
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Frequency of modulation
"Note" (p. 51)
Depth of modulation
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through the
chorus (D).
Output Level
0
Flanger
Balance D
Feedback
Overdrive Overdrive Flanger Flanger
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive sound
Adjusts the delay time from the direct sound
until the flanger sound is heard.
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Frequency of modulation
"Note"
(p. 51)
Depth of modulation
Adjusts the proportion of the flanger sound
that is fed back into the effect. Negative (-)
settings will invert the phase.
Adjusts the volume balance between the
sound that is sent through the flanger (W)
and the sound that is not sent through the
flanger (D).
Output Level
L out
Balance W
Balance W
R out
L out
Balance W
Balance W
R out