Appendix; Parameter Guide; System - Roland SP-404MK2 Reference Manual

Appendix

Appendix

Parameter Guide

SYSTEM

GENERAL
Parameter Value
This sets how the values change when you move the knobs.
Edit Knob
CATCH
Mode
DIRECT
This sets how the values change when you move the knobs.
CATCH
EFX Knob
Mode
DIRECT
Manual
This sets the project that loads when the unit starts up.
Load Project Last
1–16
This sets the functionality of the [SUB PAD] button in sample mode.
Sub Pad Mode Retrig
SkipBack
1–10
Auto Trig
Level
Scrn Saver 1, 5, 10 (min)
Time
OldRave, Naminori
Scrn Saver
Custom
Type
Disp Off
BPM Auto ON, OFF
Dtct
BPM Detect 100-199, 80-159,
Range 70-139, 50-99
When Pad Mute is on, this selects whether to monitor the muted samples.
Mst+Phn
Pad Mute
Master
This sets how the samples play back when switching between patterns during pattern playback.
PTN Change
MKII
Mode
SX
Normal, Short, OFF
Pop-up Time
Sets the recording time for skip-back memory.
SBS Time Def
Long
108
When you move a knob, control data is only outputted when the position of the
knob reaches or "catches up" to the value of its internal parameter.
●
In "Mixing the Samples (DJ
regardless of the settings.
When you move a knob, the control data (current position) is always outputted.
When you move a knob, control data is only outputted when the position of the
knob reaches or "catches up" to the value of its internal parameter.
When you move a knob, the control data (current position) is always outputted.
When you switch effects, control data corresponding to the position of the knob is
outputted.
Loads the project that was used right before the power was last turned off.
Loads a specified project.
Retriggers the current pad (plays its sound again).
Switches to skip-back mode.
Sets the level at which note input is detected (the level at which sampling
automatically starts, and the level at which recording to the skip-back memory
begins).
Sets the time before the screen saver starts (in minutes).
Selects the type of screen saver.
When you select "Custom", you can use an image file that you've imported as the
screen image for the screen saver
Select "Disp Off" to turn off the display.
When this is set to "ON", the tempo (BPM) is automatically detected when you
import a sample.
Selects the range at which the tempo (BPM) of a sample is automatically detected.
Muted samples are not outputted to any jack.
Muted samples can be output (monitored) from the PHONES jack. In this case, no
effects are applied.
Sample playback stops when the pattern changes.
Sample playback continues when the pattern changes.
Sets how long the popup screens are displayed.
Set this to "Short" to make the popup screens display for a shorter time than the
"Normal" setting.
Set this to "OFF" if you don't want popups to display.
Recording time: 25 sec (max.)
Recording time: 40 sec (max.)
Explanation
MODE)(P.77)", the knobs work in CATCH mode,
(Customizing the Screen Saver(P.89)).