Table of Contents
Advertisement
INFORMATION ABOUT REPLACEMENTS
6.5 Replacement of AdBlue®/DEF filter
Warning
•
Before proceeding with operation, read
•
Do not lubricate gaskets A with oil or fuel.
•
Filter D includes gaskets A in the package.
•
Avoid any type of contamination during replacement.
•
Before starting any operations, make sure the key on the machine's panel is OFF and the AdBlue®/DEF pump
has executed the circuit emptying operation.
1. Loosen cap B.
2. Remove cap B and extract filter bracket C.
3. Extract filter D.
4. Use warm AdBlue®/DEF to clean the seat of filter D on pump E
if impurities are detected.
5. Lubricate the A gaskets with AdBlue®/DEF or distilled water.
6. Place the filter bracket C together with filter D inside pump E.
7. Tighten cap B (tightening torque of 20 Nm).
6.6 Disposal and scrapping
•
In case of scrapping, the engine shall be disposed of in appropriate locations, in conformity with the law in
force.
•
Before scrapping, it is necessary to separate the rubber or plastic parts from the rest of the components.
•
The parts only composed of plastic material, aluminium and steel can be recycled if collected by the
appropriate centers.
•
Waste oil must properly be recycled and disposed of in the correct way to safeguard the environment.
According to the laws in force, it is classified as hazardous waste, therefore it must be collected by the
appropriate centers.
Par. 3.2.2
6.11
6.12
6
53
EN
Advertisement
Table of Contents
