INFORMATION ABOUT REPLACEMENTS
6
6.2 Oil filter cartridge replacement
Important
• Before proceeding with operation, read
Warning
•
Electric/pneumatic screwdrivers are forbidden.
•
In case of low use replace il 12 months.
•
For disposal of oil filter cartridge and fuel filter refer to
DISPOSAL and SCRAPPING
1. Unscrew cartridge holder cover A by performing three complete
turns and wait 1 min.
NOTE : this operation allows to oil contained in the support F to flow into
the oil sump in the correct way.
2. Unscrew cartridge holder cover A and check that the oil in the lub.
oil filter support F has flowed towards the oil sump.
3. Remove the cap A as well as the oil cartridge B from the oil filter
support.
4. Remove and replace the oil cartridge B with a new one.
Remove and replace the gaskets C, D and E with new ones.
5. Fit and tighten the cover A on the oil filter support F , tightening it
with a torque wrench G (tightening torque of 25 Nm ).
NOTE: Click on the icon to play the procedure.
EN
50
Par. 3.2.2
Par. 6.5
.
Fig 6.5
Fig 6.6
Fig 6.7
https://youtu.be/eTL3NSUrZHQ