Basic Operations - Aiwa Z-R900 Operating Instructions Manual

BASIC OPERATIONS
OPEN/
CLOSE
DISC
DIRECT aie
Reed RANDOM
DISC
Bae REPEAT
MULTI JOG 0-9,4+10
CD DIRECT
rT
=
<<>>
<>
LOADING DISCS
Press the CD button, then press the AOPEN/CLOSE
button to open the disc compartment. Load disc(s)
with the label side up.
To load one or two discs, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
DISC CHANGE
Tray
number
To load three to five discs, press the DISC CHANGE button to
rotate the trays after placing two discs. Place the next disc on
the empty tray. Each time the DISC CHANGE button is pressed,
the trays rotate and one disc can be placed.
After placing the discs, press the &OPEN/CLOSE button to
close the disc compartment.
The display shows the information of the disc to be played.
Tray number ofthe Total number
disc to be played _ of tracks
Total playing time
PLAYING DISCS
Load discs.
To play all discs in the disc compartment, press
the <> button.
All discs are played once.
The indicator of the DISC DIRECT PLAY button flashes to
indicate the disc being played.
Number of track
being played
Elapsed playing time
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The disc with the selected tray number is played once.
Only the selected disc tray
number is surrounded.
To play with the remote control
Press the DIRECT button, then press one of the numbered
buttons 1 to 5 within 3 seconds to select a disc.
To stop play, press the ll button.
To pause play, press the §Il button. To resume play, press again.
To search for a particular point during playback, keep the
44 oF BP button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback, turn the
MULTI JOG dial or press the << or B® button repeatedly.
To remove discs, press the OPEN/CLOSE button.
You_can only remove the two discs that face you. When the
disc(s) to be removed does(do) not face you, press the DISC
CHANGE button repeatedly.
To start play when the power is off (Direct Play Function)
Press the CD button. The power turns on and play of the loaded
disc(s) begins.
When the OPEN/CLOSE button is pressed, the power is also
turned on.
To check the remaining time
Press the EDIT/CHECK button on the remote control during play.
The amount of time remaining until all tracks finish playing is
displayed. To restore the playing time display, press the EDIT/
CHECK button.
Selecting a track with the remote control
1 Press the DIRECT button, then press one of the numbered
buttons 1 to 5 within 3 seconds to select a disc.
2 Press the numbered buttons and the +10 button to select a
track. *
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
The selected track starts to play and play continues to the
end of that disc. .
ENGLISH 14