Aiwa Z-R900 Operating Instructions Manual page 17

eistetel sie] i. (e)
Each time the << or BP button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
This section explains how to record from the tuner, CD player,
To clear the program or external equipment.
Press the EECLEAR button in stop mode.
To add tracks to the program ;
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last programmed track.
To change the programmed tracks
Clear the program and repeat all the steps again.
Preparation
* Set the tape to the point where recording will start.
* Use Type I (normal) and Type II (high/CrO2) tapes for recording.
7 Insert the tape to be recorded on into Deck 2.
Insert the tape with the side to be recorded on first facing
out from the unit.
I>
2 Press the REV MODE button to select the reverse
mode.
To record on one side only, select =.
To record on both sides, select =) or C=).
3 Press the DOLBY NR button to turn Dolby NR on
or off.
To record with DOLBY NR, turn on DONR.
To record without DOLBY NR, turn off DONR.
4 Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press the CD button and load the
disc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from the connected source, press the PHONO
or VIDEO/AUX button and play.
5 Press the @ REC/REC MUTE button to start
recording.
ie
When the selected function is CD, playback and recording
start simultaneously. |
ENGLISH 16