Aiwa Z-R900 Operating Instructions Manual page 8

GEQ FREQ,
GEQ LEVEL
MULTI JOG
GEQ
OFF/ON
MEMORY
Graphic
equalizer
preset
buttons
PRGM/
MANUAL
GEQ
- ———» JAZZ ———-+ CLASSIC
M i n wiemetss
sean saSs PRGM mode-------------77777 :
7 ENGLISH
SETTING A NEW EQUALIZATION CURVE
MANUALLY
The equalization curve can be customized based on the preset
curve or the flat one.
71 Press the GEQ FREQ button.
"GEQ-FREQ' is displayed and one of the frequency indicators
flashes.
2 Turn the MULTI JOG dial to select the frequency
to be adjusted within 8 seconds.
The selected frequency indicator flashes.
3 Press the GEQ LEVEL button within 8 seconds.
"GEQ-U/D" is displayed.
4 Turn the MULTI JOG dial to adjust the level of the
selected frequency within 8 seconds.
5 Repeat steps 1 to 4 to adjust the equalization
curve to your preference.
MEMORIZING THE EQUALIZATION CURVES
Up to four customized equalization curves can be stored in
memory.
1 Seta new equalization curve with the GEQ FREQ
and GEQ LEVEL buttons and the MULTI JOG dial.
Even if the equalization curve disappears, you can proceed
to step 2.
2 Press the MEMORY button.
"MEMORY' is displayed and all the program mode indicators
flash for 8 seconds. Go to step 3.within these 8 seconds.
3 While the program mode indicators are flashing,
press one of the graphic equalizer preset (M1 —
M4) buttons.
The equalization curve is stored.
To select the stored equalization curve
1 Press the PRGM/MANUAL button to select the MANUAL
mode.
The MANUAL indicator turns on.
2 Press one of the graphic equalizer preset (M1 — M4) buttons.