Lap Belt; Using The Wheelchair; Description Of Control Functions - B+B Eltego Instruction Manual

Eltego
| Electric Wheelchair
Distance from the armrest
• You can adjust the position of the control unit to your forearm
length.
• Loosen the hand screw on the outer side of the side part. (Fig. 12).
• Move the control unit into the desired position, then tighten the
screw again.
12

3.5.8. Lap belt

The seatbelt is attached to the side of the backrest (Fig. 13).
• Adjust the length of the seatbelt by positioning the buckle
accordingly.
• Fasten the lap belt with the latch.
13
• Open the lap belt by pushing the red button at the latch.
60
Don't forget that the cables to the control unit have
to be repositioned. This should be done by a quali-
fied mobility dealer.
While using the wheelchair, the lap belt must always
be properly fastened and closed.

4. Using the Wheelchair

After adjusting the wheelchair to your personal needs, familiarize
yourself with the control functions.
4.1. Description of Control
Functions
Control Panel
Joystick
Charger and
Programmer Socket
14
15
Bischoff & Bischoff GmbH | Rev. 04 2023.08.25
Eltego
Electric Wheelchair |
61