Table of Contents
Advertisement
Name Preset mode ends.
¢ Assigning Name and Storing Frequency with Station Preset
Memory
Hold down the desired preset button for at least two
seconds.
The name of the station is stored and the frequency for the
current station is stored in the selected preset button. The
Station Name Preset mode ends.
Also, if you make no input for 10 seconds, the name will be
stored up to the point that you have entered, and the mode
ends.
* You can assign names to up to 18 FM stations and 16 AM
stations.
¢ Ali the station names will be erased if you press the RESET
button.
« If you want to change the name of a station, first display the
name of the station (following steps 1.and 2 above), then
change the letter(s) that you want by following steps 3 and 4.
Function of Remote with number/letter entry buttons
(KCA-R6A : Optional)
Direct Access Tuning
When you know the frequency of the station that you want to
listen to, you can input it directly for quick access.
1 Select the band by pressing the FM or AM button.
2 Press the DIRECT button.
The frequency part of the display blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically canceled.
3 Enter the frequency of the desired station while the display is
blinking.
\f you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and Q.
+ When a frequency which cannot be received is input, this
frequency is not verified and operation returns to the original
frequency input mode.
* FM frequencies can only be input in 0.1 MHz steps, and not
0.01 steps.
Canceling Direct Access Tuning:
Press the DIRECT button again.
Function of Remote with DNPP button (See page 8)
Station Name Preset Play (SNPP)}
You can search for the station for any station if its name has
been preset using Station Name Preset.
1 Press the DNPP button on the remote.
"SNP PLAY" will be displayed once the station name preset
play mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
FM1, FM2, FM3, and AM.
Each time you press the 1
button, the station display
switches in the forward direction.
Each time you press the kd button, the station display
switches in the reverse direction.
Stations whose names have not been stored will be displayed
as frequencies.
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2 Once the name is displayed for the station you want to listen
to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.
—21—
Advertisement
Table of Contents
