Kenwood KRC-685R Instruction Manual page 37

Tuner Mode
© </p> (TUNE) buttons
Press the é<d button to make decreasing seeks (using the
preset tuning mode).
Press the 1
button to make increasing seeks (using the preset
tuning mode).
Use to move the cursor left or right during station name input.
e AM/FM button ;
Press the AM button to select the AM band.
Prass the FM button to select and switch between FM1, FM2,
and FM3 bands.
During station name input, selects digits and symbols.
¢ DIRECT/OK button
During station name input, stores the already input data in
memory and ends the input mode.
During Station name preset play mode, selects station.
Press the OK button during the tuner mode results the
frequency part of the display blinking. In such cases, press the
button again. It returns to the original display.
¢ DNPP button
Enters and cancels the Station Name Preset Play mode.
© pi button
Enters and cancels the Program Type Selection (PTY) mode.
© </>! buttons
e DISC buttons
© pi button
¢ OK button
¢ DNPP button
Tape Mode
© </> buttons
¢ AM button
Rewinds the tape.
¢ FM button
Fast forwards the tape.
¢ PROG button
Disc Control Mode
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Enters and cancels the Disc Name Preset Play mode.
—37—