Switching Display For Tuner; Direct Access Tuning - Kenwood KRC-PS655 Instruction Manual

| Switching Display for Tuner
You can|change the display used when listening to the radio.
Changing the Display:
Each: time you press the DISP button, the display changes as
follows:
Station frequency
Vv
Program Service name (during RBDS station reception) /
SNPS name (only when being preset}
| Vv
Radio text (only during RBDS station reception)
¥. i
Clock
[Nore]
« When receiving an RBDS station to which a name has been
preset with Station Name Preset, switching to the program
service name/SNPS name display will result in the program
service name being displayed with priority.
* Only when the Switching Clock display function (P.31) is on, the
clock is displayed.
* The @ indicator lights while the clock is displayed.
When you know the frequency of the station that you want to
listen to, you can input it directly for quick access. ;
Canceling Direct Access Tuning:
Function of Remote with number/letter entry buttons (See page 9)
Direct Access Tuning
1 Select the band by pressing the FM or AM button.
2 Press the DIRECT button.
The frequency part of the display blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically canceled.
3 Enter the frequency of the desired station while the display is
blinking.
lf you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
When a frequency which cannot be received is input, this
frequency is not verified and operation returns to the original
frequency input mode.
Press the DIRECT button again.
13