Table of Contents
Advertisement
English
Tuner features (See page 5)
Funciton of the KRC-685R/685W
1 Press the SRC (source) button repeatediy to select the tuner
mode."TUNER' is displayed when the tuner mode has been selected.
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches between
the FM1, FM2 and FM3.
Press the AM button to select the MW/LW bands.
3 » Auto Seek Tuning
Press the I
button to seek higher frequencies.
Press the é< button to seek lower frequencies.
¢ Preset station seek tuning
Press the Pi button to move to the next preset station (i.e., the one
with the next highest number), and the <4 button to move to the
last preset station (i.e., the one with the next lowest number).
lf the frequencies stored at the preset numbers receive stations
which were not originally memorized when traveling long
distances, the preset number is not displayed. In such cases,
pressing the ¢</»b1 button to use preset station seek will
receive channel 1.
* Manual Tuning
Press the I
button to increase the frequency by one step.
Press the ké< button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being received.
Local Seek Function
With the local seek function turned on, auto seek tuning skips
stations with relatively poor reception.
Turning Local Seek Function On/Off:
1 Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
2 Keep pressing the mI button until the local seek function appears
in the display.
Press the I< button to search in the other direction.
The function setting is indicated by "LO.S ON' or "LO.S OFF" in the
display, indicating that the local seek function is on or off, respectively.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Monaural Reception
ee
When poor stereo reception is experienced, this function will .
reduce noise and improve listening conditions.
1 Press the MENU button for at least one second.
""MENU' is displayed and the menu mode is turned on.
2 Keep pressing the mb button until the monaural reception
function appears in the display.
Press the <4 button to search in the other direction.
The function setting is indicated by "MONO OFF" or "MONO.
ON" in the display, indicating that monaural reception is on or
off, respectively.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Station Preset Memory.
Store the frequency of a station. You can then recall that
station with a single touch of a button.
1 Select the band/station that you want to have stored.
2 Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
You can store six stations in each of the FM1, FM2, FM3, and
AM (MW/LW) bands.
—12—
Advertisement
Table of Contents
