Tuner Operation; Station Preset Memory; Presettuning; Direct Access Tuning - Kenwood KDC-X792 Instruction Manual

Tuner Operation
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Select
"P.MEM'~
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Select the number to put in the memory
Turn the Control knob.
4
Determine the number to put in the memory
Press the Control knob.
S
Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
~
• This function can be operated with
[lJ - [6J
button.
- Press the desired [1] - [6J button for at least 2 seconds.
Preset Tuning
Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Turn the Control knob.
A station list is displayed.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
~
• This function can be operated with [1] -
[6J
button.
- Press the desired [1] - [6] button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
" - - - _ I I
is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
- -
92.1 MHz (FM) [0], [9], [2], [1]
810
kHz (AM)
-::-[0:' - :],[:=8]' - 7, [1:7"],-:-:-[07-]- - - - - -
Cancelling Dired Access Tuning
Press the [DIRECT] button on the remote
control.
~
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
English
I
17