Table of Contents
Advertisement
Other features (See page 7)
Function of Remote with DNPP button (See page 8)
Disc Name Preset Play (DNPP)
If you have preset the name of a disc that you want to listen
to in the disc changer, you can look for it by name and start
playing it.
Touch sensor tone
!
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Turning the Beep On/Off:
1 Press the MENU button for at least one second.
"MENU* is displayed and the menu mode is turned on.
2 Keep pressing the mi button until the Touch sensor tone
1 Press the DNPP button on the remote.
"DNP PLAY' will appear in the display, and the disc name
preset play mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
in any of the units that are connected, discs that have not been
function appears in the display.
Press the k¢< button to search in the other direction.
The function setting is indicated by "BEEP ON" or "BEEP OFF"
in the display, indicating that the current beep setting is on or
* This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
* Discs in the disc changer that have never been played before
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because:of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name. Also
note that "NO DISC' will be displayed when a disc has not been
loaded.
Rapid display (forward / reverse}:
Press the DISC+ or DISC— button.
Pressing the DISC+ button will rapidly display the preset
names/disc titles in order.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
The beep sound is not output from the preout jacks.
Function of the KRC-685R/685W
Selectable Hlumination.
You can switch the color of the button illumination between
green and amber.
1 Press the MENU button for at least one second.
"MENU' is displayed and the menu mode is turned on.
2 Keep pressing the mI button until the Selectable Illumination
Pressing the DISC— button will rapidly display the preset
names/disc titles in reverse order.
2 When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP meade:
Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
3 Switching settings
4 Press the MENU button to end the menu mode.
—31—
function appears in the display.
Press the k@< button to search in the other direction.
The function setting is indicated by "COL GRN" or "COL AMB"
in the display, indicating that the current color is green or
amber, respectively.
Press either the AM or FM button .
The display and setting will change.
Advertisement
Table of Contents
