Table of Contents
Advertisement
English
Cassette
player features (See page 6)
Playing Cassette Tapes
Loading and Playing Cassettes:
A press of the release button results in the faceplate dropping
open to the front, thereby exposing the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The tape will start playing.
iuelibeck on the right side of the faceplate with your hand until
it locks
The 3 IN 8 indicator lights up when a caseette has been loaded.
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing to
do so might deform the tape.
Playing Cassettes Already Loaded:
ies ate SRC button repeatedly until the tape mode is
obtained.
"TAPE" is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the
other side.
Ejecting Cassettes:
Press the release button
and drop open the
faceplate.
Press the & button
located near the cassette
insertion slot.
The tape stops playing
and the cassette ejects.
Push back on the right side of the faceplate with your hand
until it locks.
* When the faceplate has been dropped open, it might interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an
appropriate action, then operate the unit.
* Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
* Do not use the unit with the faceplate in the open condition.
4 button
Doing so will cause breakdown.
Remove a cassette from the unit when not listening to it for a
while. If you leave it in the unit too long, the tape may stick to
the tape head and cause unit malfunction.
Fast Forwarding and Rewinding Cassette Tapes
Fast Forwarding Tapes:
Press the FM button.
The tape indicator blinks in the direction of the tape as it is
being fast forwarded.
Rewinding Tapes:
Press the AM
button.
The tape indicator blinks in the direction of the tape as it is
being rewound.
Canceling:
Press the PROG button.
Normal tape play will begin.
Funciton of the KRC-685R/685W
Using Dolby B Noise
Listen to tapes recorded using Dolby B NR.
Turning Dolby B Noise Reduction On/Off:
Press the B NR button to switch Dolby B NR on and off.
The Dolby B NR indicator lights up when it is turned on.
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
229 =
Advertisement
Table of Contents
