Table of Contents
Advertisement
s
2
—
D>
S
uy
RDS features (See page 6)
Funciton of the KRC-685R/685W
Presetting Volume for Traffic information/News
Preset the volume level to be used for traffic information and
news broadcasts.
1 Tune into the station for which you want to set the volume.
2 Adjust the volume to the desired level.
3 Press VOL ADJ button for at least two seconds.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
* The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
* You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.
Tuner features (See page 5)
Funciton of the KRC-585
You can choose from three tuning
modes: auto seek, preset
station seek, and manual. The
indicator lights up when
auto seek tuning is selected, and the
indicator lights
when preset station seek tuning is selected. -
Selecting Tuning Mode:
Press the AUTO button.
Each time you press the AUTO button, the mode switches as _
follows.
AUTO 1
(Auto Seek Tuning)
v
AUTO 2
(Preset Station Seek Tuning)
e e
A
MANUAL
(Manual Tuning)
Tuning:
1 Press the SRC (source) button repeatedly to select the tuner
mode."TUNER' is displayed when the tuner mode has been
selected.
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3 (which are used for groups of
preset stations).
Press the AM button to select the AM band.
3 © Auto Seek Tuning
Press the ®I button to seek higher frequencies.
Press the ké<¢ button to seek lower frequencies.
e Preset station seek tuning
Press the »1 button to move to the next preset station (i.e.,
the one with the next highest number), and the é< button to
—18—
Advertisement
Table of Contents
