Table of Contents
Advertisement
English
Installation
@ Installation (non-Japanese cars}
Firewall or metal support
Accessory®
Bend the tabs of the
mounting sleeve with a
screwdriver or similar
Phillips truss
utensil and attach it in
head sheet
Metal mounting
place.
metal screw
strap
{commercially
available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
B Removing the hard rubber frame
1 Engage the catch pins on the removal tool and remove the two
locks on the lower level.
Lower the frame and pull it forward as shown in the figure.
"—
Accessory@ Removal tool
2 When the lower level is removed, remove the upper two
locations.
The frame can be removed from the top side in the same
manner.
= 40
Advertisement
Table of Contents
