Auto Memory Entry; Clean Reception System Circuit (Crsc); Direct Access Tuning - Kenwood KRC-603C Instruction Manual

Tuner features
(See page 6}
Auto Memory Entry
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to six frequencies can be stored this way.
1 Select the band for which you want to store stations.
2
Press the AME button for at least two seconds to start auto
memory entry.
The numbers of the preset station buttons are shown in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Clean Reception System Circuit (CRSC)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Turning CRSC On/Off:
Press the CRSC button for at least one second to turn the
function on/off. 'CRSC ON' is displayed when CRSC is on.
NOTE |
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a situa¬
tion, turn it off.
Function of remote {See page 8
Direct Access Tuning
When you already know the frequency of the station that you
want to listen to, you can enter it directly for quick access.
(Function of remote control)
1 Select the band by pressing the FM or AM button.
2 Press the DIRECT button.
In the display, "—" blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically cancelled.
3 Enter the frequency of the desired station whilst the display is
blinking.
If you want to listen to an FM station at 92.1 MHz, for exam¬
ple, press 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 8, 1, and 0.
NOTE
• You cannot enter frequencies for a band that are impossible for
it to receive.
Cancelling Direct Access Tuning:
Press the DIRECT button again.
12