7.10 "Force Mode" menu
Force Mode is used to set the timing of video sources that cannot be displayed with the tim-
ings saved in the monitor.
Function
Horizontal Resolution
Vertical Resolution
Total horizontal lines
Horizontal blank pixel
Vertical blank pixel
Mode
Execute function...
CuratOR EX190
Instructions for Use, 06/2022
Values
Active / Start / Inactive
Default: Inactive
7.10 "Force Mode" menu
Description
Set the horizontal resolution in the active resolu-
tion range.
Set the vertical resolution in the active resolution
range.
If the resolution is known, this can be used as the
approximation value. The following applies: "Total
horizontal lines" > "Horizontal resolution".
A larger "Horizontal resolution" can result in the
image being split vertically.
Set the horizontal blanking interval.
Set the vertical blanking interval.
Set Force Mode
•
When "Active" is selected, the specified timing
values are applied with "Execute function".
•
Force Mode is switched off when "Inactive" is
selected.
•
When "Start" is selected, the start values for
the timing are determined using "Execute func-
tion".
See also
Determining the timing data [} 30]
When "Start" is selected in Mode, the set video
resolution is executed.
Operation
47