Table of Contents
Advertisement
USING THE PROJECTOR
Security menu
Password
The Security feature allows you to password protect your projector. Once you enable the Security feature, you must
enter the password before you can project an image.
Note:
The password default value is "12345".
Change Password
Change the password.
Communications menu
LAN
Configure the local area network (LAN) settings.
‡
DHCP: Turn the DHCP On/Off.
‡
IP Address: Select an IP address.
‡
Subnet Mask: Select subnet mask number.
‡
Gateway: Select the default gateway of the network connected to the projector.
‡
MAC Address: Display the network MAC Address value.
‡
Apply: Apply Network settings.
42
English
DISPLAY
Password
Change Password
OUTPUT
SETUP
OPTION
DISPLAY
LAN
WLAN
Network
OUTPUT
Serial Port Baud Rate
Serial Port Path
Projector ID
SETUP
IR Control
OPTION
Security
Communications
Off
19200
RS232
0
Advertisement
Table of Contents
