Table of Contents
Advertisement
USING THE PROJECTOR
3D menu
3D Format
Set 3D format. Supports Mandatory 3D formats and frame sequential 3D@120Hz.
‡
Auto: When a 3D identification signal is detected, the 3D format is selected automatically.
‡
Frame Packing: Display 3D signal in "Frame Packing" format.
‡
Side by Side: Display 3D signal in "Side by Side" format.
‡
Top and Bottom: Display 3D signal in "Top and Bottom" format.
‡
Frame Sequential: Display 3D signal in "Frame Sequential" format.
‡
Off: Disable the function.
3D Invert
Choose to enable or disable inverting 3D sync signal for the application of using single projector.
‡
On: Invert the left and right frame contents.
‡
Off: Display the default frame contents.
DLP Link
Select 3D Sync source.
On: 3D Sync type is DLP Link.
‡
‡
Off: 3D Sync source is from the 3D Sync OUT connector.
3D Sync Out
Transmit a 3D sync signal by the 3D sync output corrector to the emitter or to the next projector for 3D blending
purposes.
Frame Delay
Set the frame delay to correct asynchronous displaying image under 3D blending.
32
English
DISPLAY
3D Format
3D Invert
DLP Link
OUTPUT
3D Sync Out
Frame Delay
SETUP
OPTION
3D
Auto
To Emitter
61
Advertisement
Table of Contents
