Optoma ZU1050 User Manual page 36

USING THE PROJECTOR
V Digital Zoom
Change the size of projector's display area vertically. If the display area has been resized by this setting, it can be
moved by changing the V Digital Shift setting.
H Digital Shift
Shift the display area horizontally if its size has been changed by the H Digital Zoom setting.
V Digital Shift
Shift the display area vertically if its size has been changed by the V Digital Zoom setting.
Image Warping
Configure the image warping settings. Refer to "Image Warping menu" on page 36.
PIP/PBP Settings
Configure the PIP/PBP settings. Refer to "PIP/PBP Settings menu" on page 38.
Image Warping menu
PC Mode
Enable PC software to control advanced geometry using multi-point grid adjustment.
H Keystone
Adjust image distortion horizontally and make a squarer image. Horizontal keystone is used to correct a keystoned
image shape in which the left and right borders of the image are unequal in length. This is intended for use with
horizontally on-axis applications.
36 English
DISPLAY
PC Mode
H Keystone
V Keystone
OUTPUT
H Pincushion
V Pincushion
4-Corner
SETUP
Reset to Default
OPTION
Image Warping
Off
20
20
50
50